Seeing is believing!

No soldering is required. Ideal project for those new to prop building

GPStar Proton Pack & Neutrona Wand Kit

A fully integrated kit for your Haslab Proton Pack & Hasbro Neutrona Wand.

Jammed packed with Features and add-ons! Easy to install!

Main Features

  • Designed to be updated with new features and future optional add-ons. (Programming cable included)
  • All existing Haslab Pack and Hasbro Wand features still exist (ie. ribbon cable removal, The Video Game firing modes, volume control).
  • 3 different modes!
  • Can turn on the Pack via the Wand Activate Switch.
  • 1984/1989 mode uses the middle LED only for an accurate look. (The 3 LED per lens option can be toggled via the Wand sub menu).
  • Clockwise/Counter clockwise cyclotron direction.
  • Start up and shut down ramping lights/sound sequence.
  • Continuous firing! You can fire your stream forever or have it overheat depending on the power level of the steam.
  • Wand tail firing sound when you stop firing (3 variations based on how long you have been firing)
  • Wand only fires when the barrel is extended and the 2 right side toggle switches are activated unlike the stock Wand.
  • Wand bargraph has new animations.
  • Three - 5V pin relays (they trigger during overheat and occasionally while continuous firing).
Visit the github page for additional information

User Controlled Menu Settings

DEEP Wand settings menu:

  • Accessed via the barrel’s orange hat light after toggling The Video Game modes or while the Wand is powered down.
  • Music playback control, volume control for Pack/Wand, independent music volume control for Pack/Wand, independent sound effects volume control for Pack/Wand, loop music track, change track.
  • Wand sub menu allowing you to toggle various main features.

Wand Sub menu features:

  • 1984/1989/2021 mode,
  • Cyclotron rotation direction,
  • Toggle 1984/1989 modes single LED to 3 LEDs per cyclotron lens
  • Vibration control
  • Vibration while firing only
  • Smoke settings
  • Crossing the streams /Video Game modes
See More Menu Features

Polyphonic Sound

Utilizing Polyphonic technology from The Wav Trigger audio device, this kit can play and mix up to 14 stereo tracks simultaneously and independently.

  • Your Pack boots up and the idle sound effects overlay/transition smoothly.
  • You boot up the Wand via the 3 toggle sequence accurate to the Afterlife movie and notice each unique toggle effect that is played is layered on top of each other.
  • You Fire! While blasting away with the Proton stream you can still hear all the layers of sound effects that came before...the Pack effects, each Wand toggle effect, etc.
  • Oh and let's not forget music mode. Yes while your Pack is rocking out tracks from your favourite scenes you can still operate your Proton Pack with all of it's accompanying sound effects independently and once again layered on top of the music
  • You may also notice during all this that the transitions between sound effects are smoothly layered with no janky transitions.

Click to listen to the symphony of sounds overlapping!

  • Inner Cyclotron Cake with spinning lights.

    Drop in our included 35 neopixel ring into your existing cyclotron cake or a 3D printed replacement (sold separately) to really bring an awesome Haslab inclusion to life! It can also change colour based off The Video Game firing modes.

  • LED support for the inner panel switch next to the Cyclotron Cake.

    Our included LEDs connect to our Pack board and the included 3D printed inner panel really makes the inside of your Pack POP!

  • Made for those who want a Speaker kit, our kit includes wires and a 3D printed mount that was designed for 3" speakers and a 12V amplifier. We leave it to you to purchase yourself as it would be cheaper for you.

  • Smoke

    Compatible with a wide array of aftermarket smoke setups from various vendors, or build one yourself.

  • 28 LED Bargraph

    Support for a 28 LED Bargraph from Frutto Technology to replace the 5 LED Hasbro bargraph.

    • Think back to the "heat 'em up!" moment in the first film. 
  • Cyclotron LED Replacements + N-Filter Lights

    Replace the lights in the cyclotron lid with RGB enabled leds from Frutto Technology. This enables you to have The Video Game mode colours in your cyclotron lid or even your own custom colours which we call "Spectral Mode" which can be configured from the menu system. 
  • Power Cell LED Replacements

    Compatibile with Frutto Technology 15 LED RGB Power Cell. This powercell offers 2 more extra LED's to be screen accurate to the films, and it has the ability to change colours with our "Spectral Mode" and The Video Game modes. 
  • Speakers & Amplifier

    There are many options available and it's really up to you. We recommend the following pair of 3" 15w speakers & 15w Class D stereo amp and it's enough to Pack a punch. It is also compatible with our Speaker Support Kit (sold separately)

  • 2 Micro SD Cards

    Two high quality Micro SD Cards are required. One for the Proton Pack and the other for the Neutrona Wand.

  • Battery

    • A regulated 5V is required to power the system with up to 2 amps is recommended.
    • The TalentCell Rechargeable 3000mAh 12V/5V battery Pack is recommended as it has input connections to output both 5v and 12v without modifications/added components needed. The 12V/5V TalentCell can be useful if you decide to use a 12V amp for your Proton Pack audio. However any other battery can work as long as it meets the power requirements indicated.

Demonstration Video and Walkthrough

Installation Video Guide

Installation Manual (pdf)

Downloadable Installation Manual:

gpstar_Haslab_Proton_Pack_Kit_Installation_Manual (pdf)