The Core Solution
A fully integrated electronics kit for your Proton Pack & Neutrona Wand.
Jam-packed with features and add-ons!
User Controlled Menu Settings
A DEEP Neutrona Wand settings menu that is easily accessible from the Neutrona Wand or over WiFi with your mobile phone.
Control music playback, change settings, operation modes and many more!
Vent Lighting
The GPStar RGB Vent Lights provide colour changing abilities for your Neutrona Wand top light and inner vent light.
Bargraph
The GPStar Bargraph + Bezel Cover brings your Hasbro Neutrona Wand to the next level. Our included mounts make installation a breeze.
Integrated WiFi Connectivity
Wireless capabilities built in to both the Proton Pack and Neutrona Wand. Control your system from your mobile phone, change settings, see real time status updates, wirelessly update the firmware and more!
Smoke Effects
Compatible with a wide array of aftermarket smoke setups from various vendors, or build one yourself.
Adaptable Cyclotron
RGB enabled cyclotron boards with 9 LED's per board. This replicates the Afterlife and Frozen Empire spinning cyclotron but also the classic 1984/1989 single light mode. The colour changing abilities also gives you the Video Game mode colours in your cyclotron or even your own custom colours which we call "Spectral Mode" which can be configured from the menu system.
GPStar Audio
Utilising technology from GPStar Audio, this kit can play and mix together many stereo tracks simultaneously and independently.
- Your Proton Pack boots up and the idle sound effects overlay/transition smoothly.
- You boot up the Neutrona Wand via the 3 toggle sequence accurate to the Afterlife and Frozen Empire films and notice each unique toggle effect that is played is layered on top of each other.
- You Fire! While blasting away with the neutrona stream, you can still hear all the layers of sound effects that came before...the Proton Pack effects, each Neutrona Wand toggle effect, etc.
- Oh and let's not forget music mode. Yes while your Proton Pack is rocking out tracks from your favourite scenes you can still operate it with all of it's accompanying sound effects independently and once again layered on top of the music
- You may also notice during all this that the transitions between sound effects are smoothly layered with no janky transitions.
Next Generation of Interaction
Equipped with an array of new sensors for a new generation of interactivity.
A 6-axis Gyroscope, Magnetometer, Temperature / Humidity Sensor and more. These array of new sensors will provide immersive interaction between a wide range of new next generation of products in the GPStar ecosystem.
The same GPStar II. A new install.
With the new GPStar Neutrona Wand II JST, all the terminal blocks have been eliminated. That means installation is faster by all easily plugging in directly into the connectors.
What is included
-
GPStar Proton Pack II
The heart of the GPStar II system. With many connections, the GPStar II boards were designed with expandability in mind. Fully reprogrammable wirelessly over WiFi or over USB-C for future firmware updates with new features!
-
GPStar Neutrona Wand II JST
Our easy to install Neutrona Wand II board, fitted entirely with plug in JST connections for a plug in play solution.
-
GPStar Audio
While your Proton Pack is rocking out music tracks from your favourite scenes, you can still operate it with all of its accompanying sound effects independently and once again layered on top of the music.
-
GPStar Amplifier
Our powerful 15 watt + 15 watt 12V stereo amplifier with built-in ground loop isolator, the audio playback will be crisp and clean with no interference. It also doubles as power hub with the ability to provide power to add-on accessories.
For those who want uncompromised sound, choose the GPStar Amplifier II which is our extremely powerful 50 watt + 50 watt 24V stereo amplifier. Do not forget to wear your earplugs!
-
GPStar Bargraph
A compact bargraph with included mounts for easy installation into your Hasbro Neutrona Wand. The standard bargraph colour is in yellow.
Available in blue, green and red upon request.
-
Bargraph Bezel
A smoked tinted acrylic bargraph bezel is included to complete the Afterlife and Frozen Empire look.
-
Cyclotron and N-Filter Lighting
RGB enabled cyclotron boards with 9 LED's per board. This replicates the Afterlife and Frozen Empire spinning cyclotron but also the classic 1984/1989 single light mode. The colour changing abilities also gives you the Video Game mode colours in your cyclotron or even your own custom colours which we call "Spectral Mode" which can be configured from the menu system.
-
Power Cell
The GPStar Power Cell. This is a 15 LED RGB Power Cell that has the ability to change colours with our "Spectral Mode" and The Video Game modes. Also available in the 1984 version which replicates the spacing between the lights from the 1984 and 1989 films.
-
Infrared
An infrared transmitter which brings un-parallel interactivity with the GPStar PSTT and Hasbro Ghost Trap.
-
RGB Vent Lights
The GPStar RGB Vent Lights provide colour changing abilities for your Neutrona Wand in an easy to install single board solution.
-
Neutrona Wand Clippard Hatlight LEDs
The Clippard Hatlight, which is the hatlight that sits just below the Clippard Valve. Two variants are included into the kit. Warm white and red.
-
Neutrik Quick Release & Hose System
The Neutrik quick release system with our mounting brackets, allows you to easily detach your Neutrona Wand from your Proton Pack at ease, as seen in Afterlife and Frozen Empire. A a pre-wired 4 pin CNLinko quick release connector for the Proton Pack side is included to complete the quick release hose system.
-
Splitless Loom
Splitless loom is included to complete the hose attachment system.
-
GPStar Volume Encoder
Fits directly into the Hasbro Proton Pack. This encoder connects to the Crank Generator knob which can quickly operate the master volume level of the GPStar II. Remember you can also adjust the volume over WiFi or via the Neutrona Wand menu system!
-
GPStar Neutrona Encoder
The GPStar Neutrona Encoder is our replacement encoder and shaft for the Hasbro Neutrona Wand. Our system plugs directly into our GPStar Neutrona Wand II JST board, giving you the ability to adjust the Neutrona Wand power levels, navigate menus and more!
-
GPStar Barrel Switch
The GPStar Barrel Switch, which drops in to the Hasbro Neutrona Wand. This safety switch prevents your Neutrona Wand from firing while the barrel has not been extended.
-
GPStar Relay
The GPStar Relay is a universal switching relay that can be controlled from your GPStar Proton Pack to activate smoke kits or other add-ons.
-
GPStar Amplifier + Vibration Motor Mount
This mount holds the GPStar Amplifier securely inside the Hasbro Proton Pack. Also included for Haslab Spengler Proton Pack variants is the vibration motor mount add-on to mount the vibration motor that is found on that Proton Pack.
-
Neutrona Wand Mounting Brackets
This is a three piece support bracket system that replaces the clear plastic tray in the Hasbro Neutrona Wand. This allows the mounting of the Slo-Blo LED, GPStar Barrel Switch and GPStar RGB Vent Light. One Red ClipLite for the Slo-Blo LED and one Transparent ClipLite for the top white LED indicator is included.
-
Bargraph 3 Piece Mounting System
A support bracket system for the GPStar Bargraph to fit easily into the Hasbro Neutrona Wand.
-
Barrel Wire Cover
Our included barrel wire cover for the Neutrona Wand helps keep all the wiring tidy and away from your barrel sliding mechanism.
-
GPStar Neutrona Wand Board Mounting
The GPStar Wand Cage has been updated now with secured mounting brackets allowing you securely screw it down into the existing holes / mounts in the Hasbro Neutrona Wand body. It has also been redesigned so the GPStar Neutrona Wand board is secured into the cage with two included m2x4 screws for a solid and clean mounting solution.
-
Cabling and Switches
Two additional replacement toggle switches and a red Slo-Blo LED with JST connectors for the Neutrona Wand are included, along with all the power cabling and speaker wiring.
-
Proton Pack Mounting Kit
A complete mount and bracket kit for using the GPStar Electronics with 3D Printed, DIY and other Proton Packs. Also included is a GPStar Hose Connector and TalentCell Mounting system for holding a TalentCell 6000 battery with the GPStar Proton Pack and GPStar Audio boards mounting onto the system.
-
Speakers
We did the work for you and tested many speakers on the market. We now provide in the kits a pair of speakers from the Italian manufacturer Lavoce, two 3" Lavoce FSN030.71 30 watt 8Ω speakers. Bringing your own speakers? No problem, choose the no speaker option.
-
WiFi
Wireless capabilities built in to both the Proton Pack and Neutrona Wand. Control your system from your mobile phone, change settings, see real time status updates and more!
-
Micro SD Cards
A 32GB Sandisk Extreme Micro SD Card is now included in the kit, for an all in one solution.
Battery Not Included
The only required component that you need to provide is a lithium ion battery.
If you are using the GPStar Amplifier, then a 12V Lithium ion battery pack is required. The TalentCell 3000mAh 12V battery is recommended due to it's small and compact size. It can provide up to 10+ hours of continuous use. If you want more capacity, then the TalentCell 6000mAh 12V battery will double your run time.
If you are using the more powerful GPStar Amplifier II, then a 24V Lithium ion battery pack is recommended to get the maximum power output from the Amplifier. The Talentcell PB240A1 24V Battery is recommended. For even longer run time, then the TalentCell PB240B1 24V battery.
User Support
-
Installation Manual
-
Operational Guide
